Kaip paversti Raspberry Pi į visada įjungiamą „BitTorrent“ dėžutę

Idealiausia turėti „BitTorrent“ klientui skirtą mašiną, kad galėtumėte sėti 24/7. Tačiau daug energijos reikia palikti pilną įrenginį, kuris dažnai būna įjungtas ir prisijungęs. Įveskite avietę Pi.

SUSIJEDS: „How-To Geek“ vadovas, skirtas įvertinti jūsų energijos naudojimą

Dauguma stalinių kompiuterių sunaudoja pakankamai daug energijos, pavyzdžiui, mūsų kuklus namų biuro serveris per metus sunaudoja beveik 200 USD vertės elektros energiją. Kita vertus, „Raspberry Pi“ yra pastatytas aplink mobilų procesorių ir gurkšnoja energiją kaip kolibris. Pagrindinė „Raspberry Pi“ plokštė sunaudoja mažiau nei 3 USD energijos per metus ir net pridedant kelis išorinius kietuosius diskus, jūs vis tiek išlaikysite savo metines eksploatacijos išlaidas mažesnėmis nei mėsainių ir bulvių bulvytėmis.

Be to, kai reikia atsisiųsti torrentus, visada įjungta mašina yra karalius. Naudodami torrentus, kuo daugiau stebėsite debesį ir į jį įsijungsite, tuo geresnis bus jūsų sekimo įrenginio santykis (net jei žiūrite iš viešųjų sekėjų, visada įjungta mašina užtikrina, kad būsite šalia, kai pasirodys tie reti failai) .

Jei tai skamba gerai, perskaitykite toliau, kai parodysime, kaip paversti savo Pi visiškai nuotoliniu būdu valdomu atsisiuntimo aparatu.

Ko tau reikia

Šioje pamokoje manome, kad turite „Raspberry Pi“ įrenginį su įdiegtu „Raspbian“, galite prieiti prie įrenginio tiesiogiai per prijungtą monitorių ir klaviatūrą arba nuotoliniu būdu per SSH ir VNC ir kad turite išorinį USB diską (arba diskus). prie jo pritvirtinta. Jei jums reikia paspartinti šias sritis, labai rekomenduojame perskaityti šiuos vadovus tokia tvarka, kokia juos turime:

  1. Viskas, ką reikia žinoti apie tai, kaip pradėti naudoti „Raspberry Pi“
  2. Kaip konfigūruoti „Raspberry Pi“ nuotoliniam apvalkalui, darbalaukiui ir failų perkėlimui
  3. Kaip Raspberry Pi paversti mažai energijos naudojančiu tinklo saugojimo įrenginiu

Pirmoje pamokoje viskas yra būtina. antroji pamoka yra neprivaloma (tačiau nuotolinė prieiga yra nepaprastai patogu turėti šiam projektui, nes atsisiuntimo dėžutė yra puikus kandidatas kurti be galvos), o svarbiausia trečiosios pamokos dalis yra tiesiog standžiojo disko nustatymas ir konfigūravimas jį automatiškai pritvirtinti prie įkrovos (kaip aprašyta trečiajame vadove).

SUSIJEDS: Kaip anonimizuoti ir šifruoti savo "BitTorrent" srautą

Be to, jei nesate pernelyg susipažinę su „BitTorrent“ kliento nustatymo anoniminiam atsisiuntimui trūkumais, turėtumėte apie tai perskaityti. Kad galėtumėte saugiai naudoti „BitTorrent“, jums būtinai reikia tam tikros rūšies anonimizuojančio tarpinio serverio ar VPN sistemos. Šiame vadove nurodytas tarpinis serveris yra pigus ir lengvas, tačiau geras VPN paprastai yra greitesnis ir universalesnis, todėl patikrinkite šį vadovą, jei norite VPN.

Peržiūrėję visą medžiagą ir sukonfigūravę „Pi“, atėjo laikas užsiimti verslu paversti „Pi“ tyliu ir ypač mažos galios atsisiuntimo žvėriu.

Pirmas žingsnis: įdiekite „Deluge“ „Raspbian“

Verta apsvarstyti keletą „Linux“ skirtų „BitTorrent“ klientų, tačiau mes rekomenduojame „Deluge“. tai tik tinkama funkcijų ir pėdsakų pusiausvyra, kad po mėnesio nenorėtumėte, jog įdiegėte ką nors galingesnio.

Galite konfigūruoti „Deluge“ keliais būdais, tačiau ne visos konfigūracijos yra tinkamos šiam „Head Pi“ atsisiuntimo laukeliui. Nors dauguma žmonių naudoja savo torrent klientą darbalaukyje kaip ir bet kurią kitą programą, tai mūsų tikslams nelabai tinka, nes tai reiškia, kad kiekvieną kartą, kai norėjote bendrauti su savo torrentais, turėsite prisijungti prie nuotolinio valdymo pulto. darbastalio ir netvarka su darbalaukio klientu. Tai eikvoja jūsų laiką ir švaisto išteklius Pi.

Galite paleisti „Deluge WebUI“, kuris leidžia pasiekti „Deluge“ klientą iš naršyklės kitoje mašinoje. Tai vis dar nėra mūsų pageidaujamas variantas, nors tai atveria galimybes naudoti išmaniojo telefono programą norint pamatyti ir valdyti „Deluge“ (daugiau apie tai vėliau).

Rekomenduojame konfigūruoti „Deluge“ nuotoliniame kompiuteryje, kad jis priimtų „ThinClient“ ryšius. Tokiu būdu mes galime naudoti tikrąjį „Deluge“ darbalaukio klientą kitame kompiuteryje (ar tai būtų „Windows“, „Linux“ ar „OS X“ dėžutė), kad valdytume „Raspberry Pi Deluge“ diegimą. Jūs gausite visus darbalaukio kliento pranašumus tikrame darbalaukyje, o visi veiksmai atliekami nuotoliniame laukelyje.

Jei negalite nuspręsti tarp šių dviejų variantų, iš tikrųjų galite naudoti abu kartu, nors jo nustatymas užtruks šiek tiek ilgiau. Tiesiog atlikite abiejų toliau pateiktų skyrių instrukcijas.

Pirmoji parinktis: nustatykite „ThugeClient“ prieigą

Prieš ką nors atlikdami, skirkite šiek tiek laiko ir atnaujinkite saugyklas. Atidarykite terminalą ir vykdykite šias dvi komandas viena po kitos:

sudo apt-get updatesudo apt-get upgrade

Tai atlikus, laikas pradėti diegti būtinus „ThinClient“ sąrankos komponentus. Įveskite šias komandas:

sudo apt-get install delugedsudo apt-get install deluge-console

Taip atsisiųsite „Deluge“ demonų ir konsolių diegimo paketus ir juos paleisite. Kai būsite paraginti tęsti, įveskite Y. Baigę diegti „Deluge“, turite paleisti „Deluge“ demoną. Įveskite šias komandas:

delugedsudo pkill deluged

Tai paleidžia „Deluge“ deemoną (kuris sukuria konfigūracijos failą), o tada išjungia. Redaguosime tą konfigūracijos failą ir tada paleisime jį atgal. Įveskite šias komandas, kad pirmiausia sukurtumėte originalios konfigūracijos failo atsarginę kopiją, tada atidarykite ją redaguoti:

cp ~/.config/deluge/auth ~/.config/deluge/auth.oldnano ~/.config/deluge/auth

Patekę į nano teksto rengyklę, konfigūracijos failo apačioje turėsite pridėti eilutę su tokia sutartimi:

user:password:level

Kur useryra norimas „Deluge“ vartotojo vardas, passwordyra norimas slaptažodis ir „ level10“ (visos deimono prieigos / administravimo lygis). Taigi savo tikslais mes panaudojome pi:raspberry:10. Baigę redaguoti, klaviatūroje paspauskite „Ctrl“ + X ir paprašę išsaugokite pakeitimus. Tada vėl paleiskite demoną ir konsolę:

delugeddeluge-console

Jei paleidus konsolę, jums suteikiamas klaidos kodas, o ne gražiai suformatuota konsolės sąsaja, įveskite „exit“ ir įsitikinkite, kad paleidote deemoną.

Patekę į konsolę turėsite greitai pakeisti konfigūraciją. Įveskite:

config -s allow_remote Trueconfig allow_remoteexit

Komandos ir atitinkama išvestis atrodys kaip žemiau esanti ekrano kopija.

This enables remote connections to your Deluge daemon and double checks that the config variable has been set. Now it’s time to kill the daemon and restart it one more time so that the config changes take effect:

sudo pkill delugeddeluged

At this point, your Deluge daemon is ready for remote access. Head to your normal PC (not the Raspberry Pi) and install the Deluge desktop program. You’ll find the installer for your operating system on the Deluge Downloads page. Once you’ve installed Deluge on your PC, run it for the first time; we need to make some quick changes.

Once launched, navigate to Preferences > Interface. Within the interface submenu, you’ll see a checkbox for “Classic Mode”. By default it is checked. Uncheck it.

Click OK and then restart the Deluge desktop client. This time, when Deluge starts, it will present you with the Connection Manager. Click the “Add” button and then input the IP address of the Raspberry Pi on your network, as well as the username and password you set during the earlier configuration. Leave the port at the default 58846. Click Add.

Back in the Connection Manager, you’ll see the entry for the Raspberry Pi; if all goes well, the indicator light will turn green like so:

Click Connect, and you’ll be kicked into the interface, connected to the remote machine:

It’s a fresh install, nary a .torrent in site, but our connection between the remote machine and the desktop client is a success!

Go ahead and configure the WebUI now (if you wish to do so), or skip down to the next step of this tutorial.

Option Two: Set Up Deluge for WebUI Access

Configuring the WebUI is significantly faster, and allows for using some mobile apps to access Deluge. But as we mentioned before, you’ll have access to fewer features than with the full ThinClient experience. For example, ThinClient can associate .torrent files with the Deluge ThinClient for automatic transfer to the Pi, but you can’t do this with the WebUI.

First, take a moment to update and upgrade your repositories. Open a Terminal and run the following two commands, one after the other:

sudo apt-get updatesudo apt-get upgrade

Then, to install the WebUI, run the following commands. Note: If you already installed the Deluge daemon in the ThinClient section of the tutorial, skip the first command here.

sudo apt-get install delugedsudo apt-get install python-makosudo apt-get install deluge-webdeluge-web

This sequence installs the Deluge daemon (if you didn’t already install it in the last section), Mako (a template gallery for Python that the WebUI needs), the WebUI itself, and then starts the WebUI program.

The default port for the WebUI is 8112. If you wish to change it, run the following commands:

sudo pkill deluge-webnano ~/.config/deluge/web.conf

This stops the WebUI and opens up the configuration file for it. Use nano to edit the line: “port”: 8112, and replace the 8112 with any port number above 1000 (as 1-1000 are reserved by the system).

Once you have the WebUI up and running, it’s time to connect to it using a web browser. You can use a browser on the Pi if you ever need to, but it’s not the most pleasant user experience and best left for emergencies. Open up a browser on your regular desktop machine and point it at the IP address of your Pi with the port you just chose (e.g. //192.168.1.13:8112 ).

You’ll be greeted with a password prompt (the default password is “deluge”) and be immediately encouraged to change it after you enter it for the first time. After that, you’ll be able to interact with Deluge via the lightweight interface.

It’s not quite the same as the ThinClient, but it’s robust enough for light use and has the added benefit of serving as the point of connection for lots of torrent-control mobile apps.

Step Two: Configure Your Proxy or VPN

You might be tempted to start downloading torrents now,but wait! Don’t do that yet. It’s absolutely reckless to use a BitTorrent Client without first shuttling your connection through a proxy server or VPN.

RELATED:How to Choose the Best VPN Service for Your Needs

If you didn’t read over How To Anonymize and Encrypt Your BitTorrent Traffic yet, now is the time to do so. Read over the first section (for a better understanding of why it is important to protect your BitTorrent connection), and then sign up for a proxy service or, better yet, a good VPN before continuing on.

If you’re using a VPN, it’s pretty simple: Just choose a VPN that offers a Linux client. Then, download and install the Linux client on your Pi, start it up, and connect to your desired server. (You may even want to set it to launch when the Raspberry Pi boots, so it’s always connected to the VPN.)

If you’re using a proxy, you can plug its information into Deluge under Preferences > Proxy. You need to fill out the Peer, Web Seed, Tracker, and DHT sections like so, placing your proxy username and password in the appropriate slots. Your proxy service’s Type, Host, and Port may differ, so be sure to check its documentation.

In order for the proxy settings to take effect, you need to restart the Deluge daemon. From the terminal enter the following commands:

sudo pkill delugeddeluged

After that, you should be all set.

The best way to test that you’re actively using the proxy or VPN is to download a torrent file designed expressly to report back its IP address. You can find many of these torrents online, including this one from BTGuard and this one from TorGuard. Load either or both torrents into Deluge and wait a moment.

After the torrents have had a chance to connect to their respective trackers, select the torrents in the Deluge client and check the “Tracker Status” entry as seen above. Both will report the IP address they detect from your client. If that IP address matches your public IP address, then the proxy or VPN is not configured properly and you should return to the previous section to check your configuration. If it is configured properly, you’ll see the proxy or VPN’s IP address and not your own.

Step Three: Configure Your Download Location

Next, you’ll need to configure Deluge to use your external hard drive. If you followed along with the hard drive mounting instructions in this previously mentioned guide, you’re ready with a hard drive set to auto-mount on boot.

From there, all you need to do is change the default locations in Deluge. Navigate to Deluge’s Preferences  and head to the Downloads tab. By default, Deluge directs everything to /home/pi. That little SD card is going to fill up real fast, however, so we need to change it.

First, we’re going to create some new folders in /media/USBHDD1/shares, which is the share folder we already set up in the Low-Power Network Storage tutorial. That way, we can easily access our downloaded torrents over the network and have a network accessible watch folder for auto-loading torrent files. Use the following commands to create the folder set (adjusting the pathnames accordingly for your location if you’re not using the same Pi setup from the previous tutorial like we are):

sudo mkdir /media/USBHDD1/shares/torrents/downloading sudo mkdir /media/USBHDD1/shares/torrents/completed sudo mkdir /media/USBHDD1/shares/torrents/watch sudo mkdir /media/USBHDD1/shares/torrents/torrent-backups

Then, turn right around and plug those four new directories into Deluge.

Click OK to set the directories. There’s no need to restart as you did with the proxy setup.

Step Four: Test Your Connection

Now it’s time to download a large enough torrent that we can really see if the system is running smoothly. For our test we grabbed the .torrent file for the current Linux Mint distribution–it weighs in at solid 1.7GB, perfect for monitoring the connection speeds.

Once you’ve confirmed that your connection is stable and the Linux torrent is humming along nicely, it’s time to move onto the next step: automating the client startup.

Step Five: Configure Deluge to Run on Startup

Before we leave the Deluge setup, there is one final detail to attend to. We need to set up the Deluge daemon and WebUI to run automatically when our Raspberry Pi boots up. To do so simply and without the fuss of editing more complicated init files and settings, we’ll simple annotate the rc.local file. Run the following command in a Terminal to do so.

sudo nano /etc/rc.local

With the rc.local file loaded, add the following lines to the end of the file. Note: you do not need to add the the second command ending in “deluge-web” if you are not using the WebGUI. This may also be a good place to add your VPN program, if you’re using one.

# Start Deluge on boot: sudo -u pi /usr/bin/python /usr/bin/deluged  sudo -u pi /usr/bin/python /usr/bin/deluge-web

Your rc.local file should look something like this when you’re done (possibly with the addition of that VPN):

Press Ctrl+X to exit and save your work.

At this point, we would recommend restarting your Raspberry Pi, so fire off a “sudo reboot” at the command line. Once the Pi has finished rebooting, head to your other PC and try to connect to the Deluge ThinClient and/or WebUI to make sure they both work.

There are two major errors you may encounter here. First, a failure to connect at all means that the initialization scripts didn’t work. Open up the terminal on your Pi and manually start the daemon and WebUI using the commands we learned earlier in the tutorial.  Check to see that it works now. If it does, go back up and fix your rc.local script.

Second, if you can open up the client, but it shows permission errors for your existing torrents (like the Linux torrent we used to test things earlier), that indicates that your external hard drive was not mounted, or mounted incorrectly. Review the sections on installing an external drive and setting it to auto-mount on boot in our Low-Power Network Storage tutorial.

Enhancing Your Torrenting Experience

Now that you have your torrent box configured and ready to rock, there are a few additional tools and modifications you can look into to really enhance your user experience. None of these tips and tricks are necessary, but they do make your Raspberry Pi turned Torrent Box easier to use.

Add Mobile Access: Consider downloading a mobile control app like Transdroid and Transdrone for Android. Unfortunately we don’t have any solid suggestions for iOS users, as Apple has taken a really aggressive stance towards torrent-related apps in the App Store (and has banned any apps that slipped through the submission process).

Deluge doesn’t currently have a mobile-optimized template for the WebUI, but it’s more than functional on tablets like the iPad and Kindle Fire.

Set Up a Shared Drop Folder: Although we mentioned it briefly earlier in the tutorial, ensure that the /torrents/watch/ folder you created is accessible on your network. It’s really convenient to be able to dump a pile of .torrent files into the folder and have Deluge load them up automatically.

Install Browser Plugins: There are several Deluge-centered plugins for Chrome and Firefox that improve the user experience, including:

  • Chrome:
    • DelugeSiphon: Enables .torrent adding from the WebUI
    • Deluge Remote: Simple view of current torrents and their progress
  • Firefox:
    • BitTorrent WebUI+: Enables .torrent adding from the WebUI
    • WebUI Quick Add Torrent: Greasemonkey Script that adds clickable icon on webpages for easy torrent adding

Activate Deluge Plugins: There are a host of great plugins already included in Deluge, and even more third-party plugins. Some of the included plugins you may want to take advantage of include:

  • Notification: You receive email alerts from Deluge on torrent completion and other events
  • Scheduler: Limit bandwidth based on time of day

You can find these in Preferences > Plugins. Check the ones you want and a new entry will appear in the preferences menu (e.g. Preferences > Notifications).

For more information about third party plugins and how to install them, check out the Plugins page in the Deluge Wiki.

Sukonfigūravę, išbandę ir koregavę patobulinimus ir papildinius, turite daugiau nei pajėgų torrentų dėžutę, kurios veikimas kainuoja tik centus per dieną. Raskite ramią ir ne vietoje esančią vietą, kad galėtumėte ją prijungti, įkelkite ją su torrentais ir palikite sunkiai atsisiųsti ir sėti.